ºÚÁÏÉçapp

Of particular importance for ºÚÁÏÉçapp was his discovery that specially designed 3D magnetic fields can avoid the triggering of edge magnetohydrodynamic instabilities (so-called Edge Localized Modes or ELMs for short) in H-mode plasmas. In this regime, energy confinement is improved by the formation of a "transport barrier" at the very periphery of the plasma, providing improved insulation from the hot core plasma. Operation in H-mode is required for ºÚÁÏÉçapp to demonstrate the project's high fusion power gain (Q) goals, but is accompanied by rapid and periodic bursts of energy and particle losses associated with ELMs. Although the ELMs themselves usually have relatively minor effects on the plasma, leading to losses of only a small percent of the plasma energy, they generate repetitive, fast transient plasma heat pulses on the in-vessel components facing the plasma. Left unmitigated they would, on ºÚÁÏÉçapp, greatly increase surface erosion of these components, significantly reducing their lifetime.

Todd Evans led the initial effort to demonstrate that these ELM instabilities can be avoided by applying specially tailored 3D magnetic fields called resonant magnetic field perturbations (or RMPs), while the plasma retains the desirable features of the H-mode regime. He led the first pioneering experiments on the DIII-D tokamak by using a system of coils located inside the tokamak vacuum vessel and originally installed to control a different magnetohydrodynamic plasma instability (the resistive wall mode). In 2006, he published a  in Nature Physics demonstrating, for the first time, an "ELM suppression" scheme compatible with the edge plasma conditions expected in ºÚÁÏÉçapp.

Todd's achievement had a profound impact on the fusion community and on the ºÚÁÏÉçapp design itself. A whole host of fusion devices (such as ASDEX-Upgrade, COMPASS, JET and MAST (Europe); EAST (China); KSTAR (Korea); and LHD (Japan)) followed his lead, either by deploying existing coil sets or installing completely new systems to study this innovative ELM control scheme so important to the future success of ºÚÁÏÉçapp.  As part of the ºÚÁÏÉçapp Design Review carried out in 2007-2008, the ºÚÁÏÉçapp also started a series of studies to incorporate an in-vessel coil system to provide ELM control within the ºÚÁÏÉçapp baseline design. This required a series of engineering and physics studies, to which Todd was an essential contributor.

The design effort to incorporate a comprehensive ELM control coil set into the ºÚÁÏÉçapp machine proved to be an extremely complex challenge, but was ultimately successfully completed. This was recognized by the ºÚÁÏÉçapp Council Science and Technology Advisory Committee in 2013 with its recommendation that these coils be  in the ºÚÁÏÉçapp baseline design. The ELM coils completed their final design review in 2019 and are presently being manufactured. Throughout this long process, Todd was always ready to advise and support the ºÚÁÏÉçapp in many of the specific design decisions that had to be taken to make the ELM control coils in ºÚÁÏÉçapp a reality.

In addition to his direct contribution to the ºÚÁÏÉçapp design, Todd Evans has been a leading figure in driving R&D for the application of resonant magnetic field perturbations for the resolution of specific issues affecting ºÚÁÏÉçapp plasma performance, core-edge plasma integration and the development of the ºÚÁÏÉçapp Research Plan. Among the issues, are the use of resonant magnetic field perturbations for ELM suppression in helium plasmas during ºÚÁÏÉçapp's Pre-Fusion Power Operation phase*, and the fuelling of ELM-suppressed plasmas with pellets. His curiosity, perseverance, and willingness to help others understand complicated physics issues and to produce results of practical application to fusion development will be missed by the fusion community and by the ºÚÁÏÉçapp.

Todd E. Evans died on 26 October 2020; click to read an obituary published on the DIII-D website.

**During this phase of ºÚÁÏÉçapp operation, hydrogen and helium plasma scenarios will be developed to allow the full commissioning of all tokamak sub-systems (except those involving the use of deuterium or tritium) with plasma.