������app

The 2015 roundup of news from the US ������app Project Office is now available online.

US ������app achieved a number of project "firsts" for delivery and fabrication over the last year. Deliveries to the ������app site included the first nuclear grade hardware (drain tanks) and the first highly exceptional load shipment to ������app (a 90-ton electrical transformer). The US also supplied the first plant components installed at the ������app site (a total of four transformers). On the fabrication side, US ������app shipped its first production toroidal field conductor to the coil manufacturer in Europe and has begun fabrication of the first central solenoid module.

Read all the news .

Fusion in Europe is a regular magazine on the progress of fusion research published by the consortium. In the December 2015 issue, the magazine takes a look at ongoing preparations for the deuterium-tritium campaign at JET, at the research planned on the upgraded spherical tokamaks MAST (UK) and NSTX (US), and at topical program news from fusion laboratories all over Europe.

Read the latest Fusion in Europe .

For the close of the year, EUROfusion—the European Consortium for the Development of Fusion Energy—is highlighting 24 cutting-edge technologies that have either benefited from, or are the by-products of, fusion research.

Superconducting magnets, low-activation heat-resistant materials, high-tech filters, sophisticated computer codes ... work being carried out around the world on fusion science and technology is pushing known technologies to new levels or breaking new ground for the benefit of many other sectors and, ultimately, society at large.

Follow the Spinoff Advent Calendar on EUROfusion's .

Members of MIT's Plasma Science and Fusion Center (PSFC) community are cheering the start of a long-anticipated physics experiment at the Max Planck Institute for Plasma Physics in Greifswald, Germany. Two teams of PSFC researchers are collaborating on the Wendelstein 7-X device, the world's largest fusion experiment designed in the stellarator line of magnetic confinement fusion devices.

The PSFC has significant experience with a different configuration of magnetic confinement, having spent decades designing and running the Alcator series of high-magnetic-field tokamak experiments — the Alcator C-Mod device, located on campus, is the latest in that series. There are many similarities between the two designs, however. 

Both the tokamak and the stellarator seek to harness the energy released from the fusion of hydrogen isotopes to provide clean and safe electrical power. Both use helical (spiraling) magnetic fields to contain the hot plasma fuel in a donut-shaped chamber. In a tokamak, this field is generated both by external electromagnets and a large electrical current that is driven in the plasma itself. Driving and sustaining this plasma current, and its impact on stability and transport of energy and particles, is a major focus of the research at MIT.

The stellarator concept takes a different approach. First invented by the noted astrophysicist and fusion pioneer Lyman Spitzer of Princeton University in 1950, the stellarator provides the entire helical field through external electromagnets formed in highly complex and twisted shapes. 

Future experiments at W7-X will address the role that plasma turbulence plays in limiting overall performance, and PSFC researchers are working with the W7-X group to investigate this. One PSFC team — principal research scientist Jim Terry and postdoctoral researcher Seung-Gyou Baek — will develop a fast camera system for viewing light emitted from the plasma, and will make important measurements of turbulence near the edge of the plasma. The other team — physics professor Miklos Porkolab and staff scientist Eric Edlund — will develop a specialized interferometer for imaging density fluctuations deep in the hot plasma core. The issues surrounding turbulence are important in stellarators, as they are in tokamaks, since turbulence moves heat and particles across the confining magnetic field faster than would otherwise occur. Both teams expect to have first measurements during the 2017 experimental campaign.

Read the original article on PSFC's website .

The Russian Domestic Agency for ������app reports that two shipments recently left factories in Saint Petersburg and Podolsk for the ������app Project.

The first shipment contains correction coil busbars—the components that connect magnet coils to their power sources—as well as flexible links for busbar interconnections. These components were transported by truck (pictured) from the Efremov Institute (NIIEFA) in Saint Petersburg directly to the ������app site. The fabrication and supply of switching equipment, busbars and energy-absorbing resistors for the power supply and the protection of the ������app superconducting magnetic system add up to the most expensive, and one of the most complicated, systems falling within the scope of in-kind procurement from Russia (25 systems in all). In accordance with the busbar Procurement Arrangement, NIIEFA will manufacture and ship approximately 5.4 km of busbars with a total weight exceeding 500 tons.

In the second shipment, four lengths of poloidal field superconductor (two unit lengths of 720 metres and two of 414 metres) were loaded onto trucks at the Cable Institute (JSC VNIIKP) in Podolsk for delivery to the European jacketing line at Criotec (Chivasso, Italy). The conductors are destined for the ������app poloidal field coil magnet system.

-- Alexander Petrov, ������app Russia

On 4 December the Programme Manager of EUROfusion, Tony Donné, visited ������app and spoke to staff in the ������app auditorium.

EUROfusion is a consortium of 29 research organisations and universities from 26 European countries plus Switzerland that is collaborating to achieve Europe's Fusion Roadmap, which outlines the most efficient way to realize fusion electricity by 2050. ������app is the key facility on the road to fusion energy, and Professor Donné stressed in his talk that everything possible must be done to support ������app construction, optimize ������app operation and ensure minimal delay to the next-phase device, DEMO.

Professor Donné also advocated the extension of the European tokamak JET under an international regime in support of ������app. The prolonged use of JET as a risk-mitigation device for ������app and for the training of a generation of scientists, engineers and technicians for ������app could give the world fusion community access to deuterium-tritium plasmas approximately 10 years before ������app.

Read more about , Europe's , and .

The aim of the WEST project is to turn the Tore Supra tokamak (France) into a test bed for ������app, with an actively cooled ������app-like tungstendivertor.

Component installation is underway. The latest WEST Newsletter (#11) reports on the most recent milestone: the installation of the divertor coil casings. Two stainless steel rings constituting the housing for the conductor windings are now assembled and positioned inside the vacuum vessel at their nominal position. The building of the coil winding can now begin.

(Photo Christophe Roux CEA-IRFM)

Read all the latest from WEST in Newsletter 11 .

An 18-month development program to prototype remote handling tooling for the ������app fusion device was demonstrated on 26 and 27 October as part of collaboration between the European Domestic Agency for ������app and the Culham Centre for Fusion Energy (CCFE) in the UK.

Representatives from the ������app, the European agency, Assystem UK, and AMEC Foster Wheeler were at Culham to see a fully remote deployment of prototype remote pipe cutting and welding tooling developed by Culham's RACE (Remote Applications in Challenging Environments).

Under a grant from the European Domestic Agency, RACE and CCFE's Engineering Implementation Department have produced a set of prototype tools intended for eventual use maintaining the neutral beam heating systems at ������app. Up to now, remote cutting and welding of process piping to the required codes, and under the challenging conditions of the ������app tokamak, had not been demonstrated, and is one of the higher risk areas across the ������app remote maintenance strategy.

������app will rely on remote handling for maintenance operations where space and/or environmental conditions in the machine do not allow manual intervention. Interconnected components, pipes, cranes and tooling will all need to be routinely repaired and maintained with millimetric accuracy.

Read the full reports of the event on the and  websites.